MostPopular Posts

Showing posts with label Mobile/PC. Show all posts
Showing posts with label Mobile/PC. Show all posts

Saturday, 2 January 2016

How to Flash MediaTek Stock ROMs With SP Flash Tool (MTK Android Smartphones)

SP Flash Tool is a user friendly tool designed for MediaTek devices like Tecno, Infinix, Innjoo, Gionee, BML, etc. SP Flash Tool is a great piece of software allows you to flash your Smartphones ROMs (Stock or Custom). It supports flash stock, installing custom recovery, Unbrick the Bricked Smartphones and firmware updates for your Mediatek devices. Below are the guide to Flash Custom ROMs using SP Flash Tool on Windows Computer.

Materials Needed
1. SP Flash tool - Download it here
2. Android ADB drivers - Download it here
3. Stock or Custom Rom you want to flash on your Smartphone. Make sure you download the exact Rom of your phone - few Roms can be found from this #link
4. Laptop or Desktop Computer
5. USB Cable for communicating between PC and Smartphones

To Flash a Backup or ROM with SP Flash Tool
Disclaimer: Don't flash another preloader and DSP_BL blocks! It is always dangerous! On some models of phones you will have a brick even if you download these blocks read from a phone which you own! Always remove from them marks in SPFT! ALWAYS have a working backup of your original ROM before you flash a new unknown ROM. Shelaf take no responsibility for any harm done while attempting this!

1. Disconnect your phone if connected with USB to the PC, and turn OFF the phone completely, also take out the battery if possible (ignore this step 1, for phones with built in battery).
2. Now connect or reconnect the USB cable to the phone with the PC while the phone is still off, Windows should pop up and begin to install the MTK65XX Preloader Drivers, this only happens if you installed the Mediatek Preloader USB Drivers correctly in Windows. After they successfully installed, disconnect the USB cable again.
2. Extract SP Flash tool on your computer and launch it.
3. Open the folder you extract it to and locate flash_tool, double click on it to open.


 3. Once it is launched, hit the Scatter-loading button


4. Locate the scatter file in the backup or Rom of the phone that you downloaded. It's usually a text file. (ALWAYS only load a ROM that is 100% made for your phone, flashing a wrong ROM may make your phone non-bootable).


5. Hit the "Download' button in SP Flash Tool to begin the flashing process


6. Connect your Smartphone to the computer with a USB without battery, if possible to remove. Press, Vol Down or Up so that the computer can easily detect the phone.
7. Once the Flashing is complete you will see a green circle confirming... With Download OK
.

8. Close the SP Flash Tool and disconnect your phone from the computer. Congratulation, your Smartphone is now flashed with the new Stock Rom you downloaded.

If your phone bootloops, remove battery and boot into recovery mode. Factory reset the phone.

Monday, 30 November 2015

MTN Free Unlimted Surfing With N0.00 with SimpleServer and psiphon

This is an updated post for MTN Music Plus of free 150MB and I'm sure that MTN Music Plus tweak is not something new to most of regular/old fans here. This post will guide you on how you can turn your MTN Music Plus of free 150MB to somehow unlimited.
when you exaust the initial 150MB, there will be little intervals before you continue your surfing. So you need to follow the processes below


The MTN Music Plus of free 150MB was customized only to access the MTN Music downloading site, but you have nothing to worry, since you know your way and if not, just continue your reading..., with the below procedure, you will be able to access any website and use it to surf with any apps.

How to Get Free MTN 150MB
Simply text Music to 5900
Wait for few seconds, then check your MTN music plus data balance by dial *559*2#.

How to Turn the Normal 150MB to Unlimited
Your browsing will stop immediately you exhaust the free 150MB given to you, but the below method will guide you on how you can keep renewing the free 150MB over and over to continue your surfing.  

Method 1:
1. After You have exhausted your initial 150MB 2. Make sure your airtime balance is #0.00 to avoid deduction of your money.
3. Text D to 5900, And another 150MB will be given to you.
4. After getting your reply, You can Check your data balance by dialing *559*2# Now connect and resume your surfing.
5. After exhausting the 150MB given to you again, Send Cancel7D to 5900
6. Then wait for the reply and send D again to 5900.
7. Check your balance again when they reply you.

That is how you can keep on renewing the 150MB over and over.
I know this procedure can be a bit stressful that’s the reason I posted another method below which is very much easier.

Method 2:
The method 1 maybe a bit stressful, here is another method which is very much easier.
1. Download Sms Scheduler here
2. Launch the app and click on Schedule SMS
3. Type 5900 in the Phone number field
4. Type Cancel7D in the message box
5. Confirm your date and time
6. Choose your SMS sending interval (the time interval you think you can finish 150mb) I used 30mins in mine, Save that.
7. Go back to the app and create another entry, And extend the time by a minute.
8. Type 5900 in the Phone number field, Type D in the message box, Confirm the date and save the sending interval to the interval you saved the first one.

This tweak works on both SimpleServer and Psiphon.
==> After completing the steps above, You can then setup your Psiphon or SimpleServer with the procedure below.

Psiphon Settings For Android Device Users:
» First of all, Download Psiphon apk version from here.
» Install it on your Android Device

Create New APN settings On Your Phone As Follows:
» Open your phone settings > Go to more > Go to mobile network > Go to access point names > Select Mtn, Then create new APN and configure as shown below:
» APN Type: default
» APN: web.gprs.mtnnigeria.net
» Proxy: 127.0.0.1
» Port: 8080
» Save And Activate it as your default settings

Then Launch Psiphon Handler, in the handler menu:
» Proxy type: Real Host
» Proxy server: musicplus.mtnonline.com
» Real Proxy type: inject
» Real Proxy server: (leave it blank)
» Select save and click on “tunnel whole device”.
Click on the option tab
» Region: Japan
» Select more option, And check Connect through an HTTP” then select “Use the following settings:” then configure as.
» Host address: 10.199.212.2
» Port: 8080
Save and Connect.

For PC Users to Enjoy this Free 150MB on PC
  • Download the modified SimpleServer for MTN Free 150MB here and extract the files inside it to a folder on yourPC
  • Run the SimpleServer.exe and configure your browser to manual Proxy 127.0.0.1 Port 8080
  • Tick "Use proxy server for all protocols" if you want it to open all secured sites.
SimpleServer Configuration For Android Users:
» Download Android SimpleServer here.
» Install it on your Android Device

Create New APN settings On Your Phone As Follows:
» Proxy: 127.0.0.1
» Port: 8080
» APN:web.gprs.mtnnigeria.net
» Save And Activate it as your default settings.

Open SimpleServer and Configure the Settings as follow:
» Proxy Host: 10.199.212.2
» Proxy Port: 8080
» Injection query/url: http://musicplus.mtnonline.com
» Injection host: musicplus.mtnonline.com
» Connection Timeout: 10
» Injection line: press enter 4 times
» Log level: Debug
» Close the settings and hit the connect button.
Also remember to power up your SimpleServer or Psiphon with AutoProxy or ProxyDroid, details is shown below

SimpleServer or Psiphon Configuration Settings for AutoProxy
=> First of all, download AutoProxy.apk
here.
=> Install and launch the AutoProxy you downloaded and tap on the Plus Sign (+) at the top right corner of the App interface, it will reveal the default settings for the Proxy Host, Proxy Port and Host type.
=> Tap on the Proxy Host and enter this IP: 127.0.0.1 then press OK.
=> Tap on the Proxy Port and enter PORT: 8080 then press OK.
=> Now tap the Proxy Type and select HTTP.
=> Go back to the AutoProxy homepage and you will see the HTTP icon as the only icon located at the top left corner of the white page homepage.
=> To connect the AutoProxy, you will need to connect your SimpleServer or Psiphon first. So start up your SimpleServer or Psiphon and then come back and connect your AutoProxy app from the homepage.

Your entire Android app will now be powered to access the internet via SimpleServer or Psiphon!

SimpleServer or Psiphon Configuration Settings for ProxyDroid.
=> First of all, download ProxyDroid.apk here.
=> Launch your ProxyDroid after you must have downloaded it to your phone.
=> Then enter these IP in the Proxy Host 127.0.0.1 and then for Port, enter 8080
=> Now, look up and Switch ON the ProxyDroid, but remember to connect your SimpleServer or Psiphon first, then come back to ProxyDroid and tap on Switch OFF to switch it ON and you can now minimize it.
=> Launch any application on your Android device and it should connect perfectly.

You are also free to access Google Play Store with any of these applications via SimpleServer or Psiphon.

Note: You are required to choose any one you like out of the both apps, don't use the both app at the same time.

Hope this information helps? If it works for you, don't forget to comment here and remember to hit Share/Like buttons for the benefit of others.

It rocks well and is very fast. Enjoy it while it last.

Popular Posts